Cleaning Data Center Certification ISO 14644-8

Our data centre cleaning standard is based on ISO 14644. Our cleaning crews were train based on ISO 14644 standard. Once we completed the cleaning process, we will perform the particle count test to measure the air quality of the data centre. We will issue you the comprehensive report and ISO 14644 to client after the particle count test has completed.

The higher degree of reliability required in a data center will require a higher degree of cleanliness, and thus require a higher frequency of services. PCDC has consulted industry leading manufacturers, consultants, and end users to help develop the following industry standards for four levels of cleanliness.

The data centers environment to be maintained at all times during the cleaning process.  This includes, but, is not limited to:

• Production capacity of the data center
• Security requirements of the data center
• Electrical integrity, mechanical, BMS, FLS and security systems
• Temperature and humidity within control limits

The cleaning of the data centers will be performed within a small enough area (2-3 tiles) so as to minimize the risk to operations of the data center.

Particle counts will be taken in multiple areas of the data centers with a calibrated particle counter.

According to your budget, a prior cleaning environmental report can be provided to each site facility manager and to the site data center manager upon completion of each project, to include:

• Particle counts and condition of sub floor Plenum
• Proper cleaning techniques
• Visible inspection of equipment and above floor surface
• Concrete sub floor deck seal inspection
• Recommendations and conclusions

PCDC will do a thorough cleaning to the high compression laminate surfaces with approved static control formulations followed with all surfaces treated with an active ionic controlled formula to enhance and preserve static control in the environment chemicals followed by treatments as needed.

✔️ Complete cleaning of all support and environmental equipment.

✔️ Complete cleaning of the sub floor and tile surface.

✔️ Cleaning of VCT tile using anti-static solution. 

✔️ Equipment.

✔️ Racking and exposed cabling.

✔️ Environmental reporting will be submitted to approved representative only.

 Our Technicians are well trained in:

• Data center protocol
• Class 100,000 HEPA/ULPA CRV
• Access floor GEL auto scrubber
• Cleaning methodology for under floor cleaning
• Cleaning under floor electrical conduits
• Cleaning of under floor cabling
• Cleaning of raised floor system
• Anti-static chemical

All personnel training and application meet the requirements of ISO Standard 14644-8 and follow line-flow technique with cleanroom class 100,000 chemical mixing and handling safety.